
SLOTTING MACHINE: 200 1AC
1 NC controlled axis (axis Y) + 1 manual axis (axis X)
LONGITUDINAL TRAVEL:
NC Controlled Axis Y
HORIZONTAL TRAVEL:
Manual Axis X
Machine Details:
Pre-programmed and reversible longitudinal C.A.M.S. 200 1AC slotting machine and tool lift obtained by alternating table movement.
Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.
Workpiece table with central through hole. 20° tilting head (in both directions).
Inverter controlled variable step-less slotting speed with potentiometer incorporated in the control panel.
The slotting machine incorporates an electro-pump for the tool cooling system and vacuum pump operated ram and trolley lubrication system.
Maintenance tools and machine instruction manual are provided.
Machine designed and manufactured to EC standards and directives.

TECHNICAL SPECIFICATIONS | 1AC | ||
---|---|---|---|
1 | Adjustable tool travel from 0 to | mm | 200 |
2 | Distance between column and tool holder | mm | 350 |
3 | Distance between table and head | mm | 460 |
5 | Ram vertical travel | mm | 370 |
6/7 | Measurements table | mm | 280x500 |
8 | Longitudinal travel (NC controlled axis Y) | mm | 230 |
9 | Horizontal travel (manual axis X) | mm | 250 |
10 | Through hole | Ø mm | 80 |
N. of variable stepless strokes | N.stroke /min. | 30 a 120 | |
Ram drive motor | Kw | 2,2 | |
Overall machine dimensions | mm | L = 1220 P = 1200 H = 2300 | |
Weight | Kg | 1150 |

SLOTTING MACHINE: 200 1ACT
1 NC controlled axis (axis y) + 2 manual axes (axes X – A)
LONGITUDINAL TRAVEL:
NC Controlled Axis Y
HORIZONTAL TRAVEL:
Manual Axis X
TURNTABLE:
Manual Axis A
Machine Details:
Pre-programmed and reversible longitudinal C.A.M.S. slotting machining 200 1ACT and tool lift obtained by alternating table movement.
Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.
Manual turntable with central through hole to floor.
20° tilting head (in both directions). Inverter controlled variable step-less slotting speed with potentiometer incorporated in the control panel.
The machine incorporates an electro-pump for the tool cooling system and vacuum pump operated ram and trolley lubrication system.
Maintenance tools and machine instruction manual are provided.
Machine designed and manufactured to EC standards and directives.

TECHNICAL SPECIFICATIONS | 1ACT | ||
---|---|---|---|
1 | Adjustable tool travel from 0 to | mm | 200 |
2 | Distance between column and tool holder | mm | 350 |
3 | Distance between table and head | mm | 360 |
5 | Ram vertical travel | mm | 370 |
6 | Measurements table (manual axis A) | mm | 320 |
8 | Longitudinal travel (NC controlled axis Y) | mm | 225 |
9 | Horizontal travel (manual axis X) | mm | 250 |
10 | Through hole | Ø mm | 100 |
N. of variable stepless strokes | N.stroke /min. | 30 a 120 | |
Ram drive motor | Kw | 2,2 | |
Overall machine dimensions | mm | L = 1220 P = 1200 H = 2300 | |
Weight | Kg | 1150 |

SLOTTING MACHINE: 200 2AC
2 NC controlled axes (axes Y – X)
LONGITUDINAL TRAVEL:
NC Controlled Axis Y
HORIZONTAL TRAVEL:
NC Controlled Axis X
Machine Details:
Automatic longitudinal and horizontal pre-programmed and reversible C.A.M.S. 200 2AC slotting machine for any required slot depth and diameter.
Tool lift obtained by alternating table movements.
Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.
Workpiece table with central through hole to floor.
Possibility of tilting head 20° in both directions. Inverter controlled variable step-less slotting speed with potentiometer incorporated in the control panel.
The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.
Maintenance tools and machine instruction manual are provided.
This C.A.M.S. Slotting Machine is designed and manufactured to EC standards and directives.

TECHNICAL SPECIFICATIONS | 2AC | ||
---|---|---|---|
1 | Adjustable tool travel from 0 to | mm | 200 |
2 | Distance between column and tool holder | mm | 350 |
3 | Distance between table and head | mm | 460 |
5 | Ram vertical travel | mm | 370 |
6/7 | Measurements table | mm | 280x500 |
8 | Longitudinal travel (NC controlled axis Y) | mm | 230 |
9 | Horizontal travel (NC controlled axis X) | mm | 200 |
10 | Through hole | Ø mm | 80 |
N. of variable stepless strokes | N.stroke /min. | 30 a 120 | |
Ram drive motor | Kw | 2,2 | |
Overall machine dimensions | mm | L = 1220 P = 1250 H = 2300 | |
Weight | Kg | 1200 |

SLOTTING MACHINE: 200 2ACT
2 NC controlled axis (axis Y-A) +1 manual axis (axis X)
LONGITUDINAL TRAVEL:
NC Controlled Axis Y
HORIZONTAL TRAVEL:
Manual Axis X
TURNTABLE:
NC Controlled Axis A
Machine Details:
Pre-programmed and reversible longitudinal C.A.M.S. 200 2ACT slotting machine and tool lift obtained by alternating table movement.
Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.
Electronic turntable with central through hole and with possibility of programming 1500 symmetrical and 99 asymmetrical divisions.
20° tilting head (in both directions). Inverter controlled variable step-less slotting speed with potentiometer incorporated in the control panel.
The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.
Maintenance tools and machine instruction manual are provided.
C.A.M.S. Slotting Machine 200 2ACT is designed and manufactured to EC standards and directives.

TECHNICAL SPECIFICATIONS | 2ACT | ||
---|---|---|---|
1 | Adjustable tool travel from 0 to | mm | 200 |
2 | Distance between column and tool holder | mm | 350 |
3 | Distance between turntable and head | mm | 360 |
5 | Ram vertical travel | mm | 370 |
6 | Measurements turntable (NC controlled axis A) | Ø mm | 320 |
8 | Longitudinal travel (NC controlled axis Y) | mm | 225 |
9 | Horizontal travel (manual axis X) | mm | 250 |
10 | Through hole | Ø mm | 100 |
N. of variable stepless strokes | N.stroke /min. | 30 a 120 | |
Ram drive motor | Kw | 2,2 | |
Overall machine dimensions | mm | L = 1200 P = 1220 H = 2300 | |
Weight | Kg | 1250 |

SLOTTING MACHINE: 200 2ACTM
2 NC controlled axis (axes Y - X) + 1 manual axis (axis A)
LONGITUDINAL TRAVEL:
NC Controlled Axis Y
HORIZONTAL TRAVEL:
NC Controlled Axis X
TURNTABLE:
Manual Axis A
Machine Details:
Automatic longitudinal and horizontal pre-programmed and reversible C.A.M.S. 200 2ACTM slotting machine for any required slot depth and diameter.
Tool lift obtained by alternating table movements.
Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.
Manual turntable with central through hole to floor.
20° tilting head (in both directions). Inverter controlled variable stepless slotting speed with potentiometer incorporated in the control panel.
The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.
Maintenance tools and machine instruction manual are provided.
Machine designed and manufactured to EC standards and directives.

TECHNICAL SPECIFICATIONS | 2ACTM | ||
---|---|---|---|
1 | Adjustable tool travel from 0 to | mm | 200 |
2 | Distance between column and tool holder | mm | 350 |
3 | Distance between turntable and head | mm | 360 |
5 | Ram vertical travel | mm | 370 |
6 | Measurements turntable (manual axis A) | Ø mm | 320 |
8 | Longitudinal travel (NC controlled axis Y) | mm | 225 |
9 | Horizontal travel (NC controlled axis X) | mm | 250 |
10 | Through hole | Ø mm | 100 |
N. of variable stepless strokes | N.stroke /min. | 30 a 120 | |
Ram drive motor | Kw | 2,2 | |
Overall machine dimensions | mm | L = 1220 P = 1250 H = 2300 | |
Weight | Kg | 1250 |

SLOTTING MACHINE: 200 3AC
3 NC controlled axes (Y – X – A)
Machine Details:

TECHNICAL SPECIFICATIONS | 3AC | ||
---|---|---|---|
1 | Adjustable tool travel from 0 to | mm | 200 |
2 | Distance between column and tool holder | mm | 350 |
3 | Distance between turntable and head | mm | 360 |
5 | Ram vertical travel | mm | 370 |
6 | Measurements turntable (manual axis A) | Ø mm | 320 |
8 | Longitudinal travel (NC controlled axis Y) | mm | 225 |
9 | Horizontal travel (NC controlled axis X) | mm | 250 |
10 | Through hole | Ø mm | 100 |
N. of variable stepless strokes | n.strokes/min | 30 a 120 | |
Ram drive motor | Kw | 2,2 | |
Overall machine dimensions | mm | L = 1220 P = 1250 H = 2300 | |
Weight | Kg | 1300 |
Movement Comparison Table
Model 200 | Longitudinal Travel | Horizontal Travel | Turntable | Ram Axis |
---|---|---|---|---|
200 1AC | NC Controlled Axis Y | Manual Axis X | --- | --- |
200 1ACT | NC Controlled Axis Y | Manual Axis X | Manual Axis A | --- |
200 2AC | NC Controlled Axis Y | NC Controlled Axis X | --- | --- |
200 2ACT | NC Controlled Axis Y | Manual Axis X | NC Controlled Axis A | --- |
200 2ACTM | NC Controlled Axis Y | NC Controlled Axis X | Manual Axis A | --- |
200 3AC | --- | --- | --- | --- |
Technical Specifications
Machine Structure
Manufactured from electric arc welded sheet metal of robust thickness, adequately ribbed and heat treated for internal stress relieving.
Head and Ram
G30 cast-iron. the head travelways are ground and hand scraped to ensure perfect ease of movement of the ram. The ram is driven by a self-braking asynchronous motor, reduction gear unit and crank assembly. Ram travel (stroke) is manually adjusted using the cam on the handwheel.
The head tilts 20° both clockwise and anti-clockwise and is the ideal solution for machining conical slots.
Rectangular Table
Quality grade cast-iron with ground and scraped travel guides. Wide central hole to floor designed for machining long shafts.
Turntable
Quality grade cast-iron with wide central through hole designed for machining long shafts.
The travelways on the table and support are ground and hand finished. Table rotation is driven by a worm screw-sprocket assembly (the worm screw is steel quality 18 NCM 5 hardened and ground and the sprocket is bronze quality B14) which incorporates a micrometric backlash recovery system. Maintenance free support guide thanks to an automatic greasing system.
Computer controlled compressed-air driven rotation lock system during machining.
Axis
Tables with NC controlled axes are moved by ground and enclosed recirculating ball screw assemblies.
Lubrication
A timer controlled pump lubrication system. When the oil level drops below the minimum level machining stops automatically and an alarm prompt is activated.
Cooling System
Closed circuit system driven by a centrifugal electro-pump and a removable swarf collection tray is positioned below the table for easy access.
Safety Protections
Sheet metal and Plexiglas folding enclosure with front panel doors for easy access when the overhead crane positions the workpiece.
Microswitch safety feature, in conformity with safety directives in force, is fitted to the enclosure to prevent opening during machining.
Electrics
Each axis is driven by a brushless motor and servo-drive with NC control. The NC control system allows easy machine programming even for complex workpieces. Electrics and wiring conform to the stringent safety directives.