C.A.M.S. Slotting Machine 250

Rod and Crank System Ram Drive


Available Model Types


Technical Specifications
C.A.M.S. Slotting Machine Model 300
C.A.M.S. Slotting Machine Model 300

SLOTTING MACHINE: 250 1AC

1 NC controlled axis (axis Y) + 1 manual axis (axis X)

LONGITUDINAL TRAVEL:
NC Controlled Axis Y

HORIZONTAL TRAVEL:
Manual Axis X

Machine Details:

Pre-programmed and reversible longitudinal slot machining and tool lift obtained by alternating table movement.

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.

Workpiece table with central through hole.

20° tilting head (in both directions).

Inverter controlled variable stepless slotting speed with potentiometer incorporated in the control panel.

The machine incorporates an electro-pump for the tool cooling system and vacuum pump operated ram and trolley lubrication system.

Maintenance tools and machine instruction manual are provided.

Machine designed and manufactured to EC standards and directives.

 TECHNICAL SPECIFICATIONS 1AC
1Adjustable tool travel from 0 tomm 250
2Distance between column and tool holdermm420
3Distance between table and headmm520
5Ram vertical travelmm430
6/7Measurements tablemm340x560
8Longitudinal travel (NC controlled axis Y)mm300
9Horizontal travel (manual axis X)mm320
10Through holeØ mm100
N. of variable stepless strokesn.strokes/min22 a 90
Ram drive motorKw3
Overall machine dimensionsmmL = 1450
P = 1300
H = 2620
WeightKg1600
Close Details

SLOTTING MACHINE: 250 1ACT

1 NC controlled axis (axis y) + 2 manual axes (axes X – A)

LONGITUDINAL TRAVEL:
NC Controlled Axis Y

HORIZONTAL TRAVEL:
Manual Axis X

TURNTABLE:
Manual Axis A

Machine Details:

Pre-programmed and reversible longitudinal slot machining and tool lift obtained by alternating table movement.

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.

Manual turntable with central through hole to floor.

20° tilting head (in both directions).

Inverter controlled variable stepless slotting speed with potentiometer incorporated in the control panel.

The machine incorporates an electro-pump for the tool cooling system and vacuum pump operated ram and trolley lubrication system.

Maintenance tools and machine instruction manual are provided.

Machine designed and manufactured to EC standards and directives.

 TECHNICAL SPECIFICATIONS 1ACT
1Adjustable tool travel from 0 tomm 250
2Distance between column and tool holdermm420
3Distance between table and headmm430
5Ram vertical travelmm430
6Measurements table (manual axis A)mm450
8Longitudinal travel (NC controlled axis Y)mm250
9Horizontal travel (manual axis X)mm300
10Through holeØ mm135
N. of variable stepless strokesn.strokes/min22 a 90
Ram drive motorKw3
Overall machine dimensionsmmL = 1450
P = 1300
H = 2620
WeightKg1600
Close Details

SLOTTING MACHINE: 250 2AC

2 NC controlled axes (axes Y – X)

LONGITUDINAL TRAVEL:
NC Controlled Axis Y

HORIZONTAL TRAVEL:
NC Controlled Axis X

Machine Details:

Automatic longitudinal and horizontal pre-programmed and reversible slot machining for any required slot depth and diameter.

Tool lift obtained by alternating table movements.

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.

Workpiece table with central through hole to floor. Possibility of tilting head 20° in both directions.

Inverter controlled variable stepless slotting speed with potentiometer incorporated in the control panel.

The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.

Maintenance tools and machine instruction manual are provided.

Machine designed and manufactured to EC standards and directives.

 TECHNICAL SPECIFICATIONS 2AC
1Adjustable tool travel from 0 tomm 250
2Distance between column and tool holdermm425
3Distance between table and headmm520
5Ram vertical travelmm430
6/7Measurements tablemm340x560
8Longitudinal travel (NC controlled axis Y)mm300
9Horizontal travel (NC controlled axis X)mm320
10Through holeØ mm100
N. of variable stepless strokesN.stroke /min.22 a 90
Ram drive motorKw3
Overall machine dimensionsmmL = 1450
P = 1560
H = 2620
WeightKg1650
Close Details

SLOTTING MACHINE: 250 2ACT

2 NC controlled axis (axis Y-A) +1 manual axis (axis X)

LONGITUDINAL TRAVEL:
NC Controlled Axis Y

HORIZONTAL TRAVEL:
Manual Axis X

TURNTABLE:
NC Controlled Axis A

Machine Details:

Pre-programmed and reversible longitudinal machining and tool lift obtained by alternating table movement.

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.

Electronic turntable with central through hole and with possibility of programming 1500 symmetrical and 99 asymmetrical divisions.

20° tilting head (in both directions).

Inverter controlled variable stepless slotting speed with potentiometer incorporated in the control panel.

The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.

Maintenance tools and machine instruction manual are provided.

Machine designed and manufactured to EC standards and directives.

 TECHNICAL SPECIFICATIONS 2ACT
1Adjustable tool travel from 0 tomm 250
2Distance between column and tool holdermm425
3Distance between turntable and headmm430
5Ram vertical travelmm430
6Measurements turntable (NC controlled axis A)Ø mm450
8Longitudinal travel (NC controlled axis Y)mm250
9Horizontal travel (manual axis X)mm300
10Through holeØ mm135
N. of variable stepless strokesn.strokes/min22 a 90
Ram drive motorKw3
Overall machine dimensionsmmL = 1450
P = 1300
H = 2620
WeightKg1700
Close Details

SLOTTING MACHINE: 250 2ACTM

2 NC controlled axis (axes Y - X) + 1 manual axis (axis A)

LONGITUDINAL TRAVEL:
NC Controlled Axis Y

HORIZONTAL TRAVEL:
NC Controlled Axis X

TURNTABLE:
Manual Axis A

Machine Details:

Automatic longitudinal and horizontal pre-programmed and reversible slot machining for any required slot depth and diameter.

Tool lift obtained by alternating table movements.

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.

Manual turntable with central through hole to floor.

20° tilting head (in both directions).

Inverter controlled variable stepless slotting speed with potentiometer incorporated in the control panel.

The machine incorporates an electro-pump for the tool cooling system and automatic timer controlled pump for ram and trolley lubrication.

Maintenance tools and machine instruction manual are provided.

Machine designed and manufactured to EC standards and directives.

 TECHNICAL SPECIFICATIONS 2ACTM
1Adjustable tool travel from 0 tomm 250
2Distance between column and tool holdermm425
3Distance between turntable and headmm430
5Ram vertical travelmm430
6Measurements turntable (manual axis A)Ø mm450
8Longitudinal travel (NC controlled axis Y)mm250
9Horizontal travel (NC controlled axis X)mm220
10Through holeØ mm135
N. of variable stepless strokesn.strokes/min22 a 90
Ram drive motorKw3
Overall machine dimensionsmmL = 1450
P = 1560
H = 2620
WeightKg1700
Close Details

SLOTTING MACHINE: 250 3AC

3 NC controlled axes (Y – X – A)

LONGITUDINAL TRAVEL:
NC Controlled Axis Y

HORIZONTAL TRAVEL:
NC Controlled Axis X

TURNTABLE:
NC Controlled Axis A

Machine Details:

Automatic longitudinal and horizontal pre-programmed and reversible slot machining and automatic rotation of turntable for any required slot depth and diameter.

Tool lift obtained by alternating table movements.

Once the pre-programmed slot depth has been reached, in automatic the machine performs a number of finishing strokes and the ram stops in its top position and the workpiece table in automatic returns to machining start cycle position.

Electronic turntable with central through hole to floor with possibility of programming 1500 symmetrical and 999 asymmetrical divisions.

Possibility of machining specific trapezoidal, circular and linear slots.

The incorporated NC technology provides a user friendly operator/machine interface, the operator can call up data on the display utilizing the keypad, enter production data.

The type of technology incorporated is easy and simple to use.

Machining programmes with zero workpiece position can be saved and stored and called up when required. It is possible to store up to 100 programmes.

This model can run in automatic two or more programmes in sequence.

The software offers the following standard applications:

  • slot repeat: this function is for repeating slot machining without having to proceed with machine setup.
  • incremental tool lift: with this function enabled the tool is completely raised out of the slot when the ram returns and returns to zero workpiece position.

If required, it is possible to add and incorporate specific software functions and applications:

  • slot bottom finishing: in the event the slot is widened the operator has the possibility of milling the bottom of the slot to finish.
  • slot side finishing: this function is for widening the slot by milling and finishing the sides.
  • decreasing tool feed: this function allows the operator to automatically modify tool feed (machining) using two specific values initial and final tool feed. This function is enabled by entering the two tool feed values.
  • air blow: ideal when machining slots in blind holes. At a defined number of ram strokes a solenoid valve is activated and air is blown onto the workpiece to remove swarf during machining. The operator also has the possibility of setting the function operating time.
  • chamfering: once having machined the slot it is possible with this function to chamfer slot edges to 45° in automatic.
  • tangential slots: this function allows the operator to machine in automatic two or more UNI 7515-76 tangential slots of any width.

20° tilting head (in both directions). Inverter controlled variable stepless slotting speed with potentiometer incorporated in the control panel. The machine incorporates an electro-pump for the tool cooling system and automatic pump for ram and trolley lubrication. Maintenance tools and machine instruction manual are provided.

Machine designed and manufactured to EC standards and directives.

 TECHNICAL SPECIFICATIONS 3AC
1Adjustable tool travel from 0 tomm 250
2Distance between column and tool holdermm425
3Distance between turntable and headmm430
5Ram vertical travelmm430
6Measurements turntable (manual axis A)Ø mm450
8Longitudinal travel (NC controlled axis Y)mm250
9Horizontal travel (NC controlled axis X)mm220
10Through holeØ mm135
N. of variable stepless strokesn.strokes/min22 a 90
Ram drive motorKw3
Overall machine dimensionsmmL = 1700
P = 1750
H = 2900
WeightKg1800
Close Details

SLOTTING MACHINE: 250 4AC

4 NC controlled axes (Y – X – A - Z)

LONGITUDINAL TRAVEL:
NC Controlled Axis Y

HORIZONTAL TRAVEL:
NC Controlled Axis X

TURNTABLE:
NC Controlled Axis A

RAM AXIS:
NC Controlled Axis Z

Machine Details:

 TECHNICAL SPECIFICATIONS 4AC
1Adjustable tool travel from 0 to (NC controlled axis Z)mm 250
2Distance between column and tool holdermm425
3Distance between turntable and headmm430
5Ram vertical travelmm430
6Measurements turntable (NC controlled axis A)Ø mm450
8Longitudinal travel (NC controlled axis Y)mm250
9Horizontal travel (NC controlled axis X)mm220
10Through holeØ mm135
N. of variable stepless strokesn.strokes/min0 a 100
Ram drive motor (brushless)Kw5.5
Overall machine dimensionsmmL = 1700
P = 1750
H = 2900
WeightKg1800
Close Details

Movement Comparison Table

Model 250 Longitudinal Travel Horizontal Travel Turntable Ram Axis
250 1AC NC Controlled Axis Y Manual Axis X --- ---
250 1ACT NC Controlled Axis Y Manual Axis X Manual Axis A ---
250 2AC NC Controlled Axis Y NC Controlled Axis X --- ---
250 2ACT NC Controlled Axis Y Manual Axis X NC Controlled Axis A ---
250 2ACTM NC Controlled Axis Y NC Controlled Axis X Manual Axis A ---
250 3AC NC Controlled Axis Y NC Controlled Axis X NC Controlled Axis A ---
250 4AC NC Controlled Axis Y NC Controlled Axis X NC Controlled Axis A NC Controlled Axis Z

Technical Specifications

Machine Structure

Manufactured from electric arc welded sheet metal of robust thickness, adequately ribbed and heat treated for internal stress relieving.

Head and Ram

G30 cast-iron. the head travelways are ground and hand scraped to ensure perfect ease of movement of the ram. The ram is driven by a self-braking asynchronous motor, reduction gear unit and crank assembly. Ram travel (stroke) is manually adjusted using the cam on the handwheel.

The head tilts 20° both clockwise and anti-clockwise and is the ideal solution for machining conical slots.

Rectangular Table

Quality grade cast-iron with ground and scraped travel guides. Wide central hole to floor designed for machining long shafts.

Turntable

Quality grade cast-iron with wide central through hole designed for machining long shafts.

The travelways on the table and support are ground and hand finished. Table rotation is driven by a worm screw-sprocket assembly (the worm screw is steel quality 18 NCM 5 hardened and ground and the sprocket is bronze quality B14) which incorporates a micrometric backlash recovery system. Maintenance free support guide thanks to an automatic greasing system.

Computer controlled compressed-air driven rotation lock system during machining.

Axis

Tables with NC controlled axes are moved by ground and enclosed recirculating ball screw assemblies.

Lubrication

A timer controlled pump lubrication system. When the oil level drops below the minimum level machining stops automatically and an alarm prompt is activated.

Cooling System

Closed circuit system driven by a centrifugal electro-pump and a removable swarf collection tray is positioned below the table for easy access.

Safety Protections

Sheet metal and Plexiglas folding enclosure with front panel doors for easy access when the overhead crane positions the workpiece.

Microswitch safety feature, in conformity with safety directives in force, is fitted to the enclosure to prevent opening during machining.

Electrics

Each axis is driven by a brushless motor and servo-drive with NC control. The NC control system allows easy machine programming even for complex workpieces. Electrics and wiring conform to the stringent safety directives.

Other Slotting Machine Models